• cpbaner


BAD63-A series Explosion-proof high-efficiency energy-saving LED lamp (ceiling lamp)

Short Description:

1. Widely used in hazardous environments such as oil exploration, refining, chemical, military and Offshore oil platforms, oil tankers, etc. General lighting and work lighting use;

2. Applicable to lighting energy-saving renovation projects and places where maintenance and replacement is difficult;

3. Applicable to Zone 1 and Zone 2 of explosive gas environment;

4. Applicable to IIA, IIB, IIC explosive gas environment;

5. Applicable to areas 21 and 22 of flammable dust environment;

6. Applicable to places with high protection requirements and humidity;

7. Suitable for low temperature environments above -40 °C.


Product Detail

Product Tags

Model Implication



1. Aluminum alloy die-casting shell, the surface is electrostatically sprayed, and the appearance is beautiful.

2. It adopts high borosilicate tempered glass transparent cover, transparent cover atomization and anti-glare design, can withstand high energy impact, resist heat fusion, and the light transmittance is up to 90%.

3. Stainless steel exposed fasteners with high corrosion resistance.

4. Advanced drive power technology, wide voltage input, with constant current, open circuit protection, short circuit protection, surge protection and other functions.

5. Configure a number of international brand LED modules, advanced light distribution technology, light and even light, light effect 120lm / w, high color rendering, long life, green and environmental protection.

6. The heat-dissipating air guiding groove with air guiding structure can ensure the service life of the LED light source.


Main Technical Parameters


Order Note

1. Select one by one according to the rules in the meaning of the model specifications, and add the explosion-proof mark after the meaning of the model specification. The specific embodiment is: “product model – specification code + explosion-proof mark + order quantity”. For example, if the explosion-proof encapsulated ceiling lamp 30W is required and the number is 20 sets, the product model specification is: Model: BAD63-Specification: A30X+Ex d mbIIC T6 Gb+20.

2. For the selected installation form and accessories, see P431~P440 in the Lamp Selection Manual.

3. If there are special needs, please specify in the order.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • FCBJ series Explosion-proof acoustic-optic annunciator

      FCBJ series Explosion-proof acoustic-optic annu...

      Model Implication Features 1. Die-cast aluminum alloy shell with static spraying, beautiful appearance. 2. External buzzer, loud and distant. 3. Equipped with a stroboscope, it can transmit warning light for a long distance. 4. Internal conductors shall be cold-pressed by OT terminals and insulated with sleeve, and the terminals shall be tightened with special anti-loose tile pad to ensure the stability of electrical performance. 5.  Ⅰ transparent cover is made of high strength of tough...

    • BAL series Explosion-proof ballast

      BAL series Explosion-proof ballast

      Model Implication Features 1. Cast aluminum alloy shell, die-casting, surface sprayed, beautiful appearance or welded with stainless steel, polished surface; 2. Steel pipe or cable wiring; 3. The compensator can be equipped as required.   Main Technical Parameters Order Note 1. Accord with the model implication’s rules to select regularly, and Ex-mark should be added behind model implication. The template is as following: code for product model implication +Ex-mark.For example, w...

    • FC-ZFZD-E6W-CBB-J Fire Emergency Lighting / CBB-6J Series Explosion-proof Emergency Light

      FC-ZFZD-E6W-CBB-J Fire Emergency Lighting / CBB...

      Model Implication Features 1. Explosion-proof type "Explosion-proof safety of the sand-filled complex" or "dust explosion-proof", in the corresponding level of explosion- proof gas and dust environment exist at the same time. 2. Aluminum die-casting shell, the surface electrostatic spray, beautiful appearance. 3. Using high-brightness LED light board, with low power consumption, long life, maintenance-free advantages. 4. Built-in maintenance-free Ni-MH battery pack, the n...

    • FCT93 series Explosion-proof LED lights (Type B)

      FCT93 series Explosion-proof LED lights (Type B)

      Model Implication Features 1. Aluminum alloy die-casting shell, the surface is electrostatically sprayed, and the appearance is beautiful; 2. The radiator is stretched from a tensile aluminum alloy material with high thermal conductivity and good heat dissipation effect; 3. Optional bracket or street lamp connection sleeve can be selected to meet the lighting needs of various places, and it is easier to overhaul and upgrade. 4. The street lamp design is designed according to the two lanes of...

    • BS51 series Explosion-proof- aiming flashlight

      BS51 series Explosion-proof- aiming flashlight

      Model Implication Features 1.  It is made of aluminum alloy with high hardness. The exterior should be spraying with sand, which can reach the effect of skid proof. The global color is argent and it has beautiful appearance. 2.  In the lamps, it has a magnetic switch, which have the functions of isolation and water proof. 3.  It adopts high non-memory battery. There are some adva- ntages of large capacity a, long service life and low discharge rate. 4.  We use a special b...

    • FCT95 series Explosion-proof inspection lamp

      FCT95 series Explosion-proof inspection lamp

      Model Implication Features 1. The outer casing is made of engineering plastic material, the transparent cover is injection molded with polycarbonate, and the LED light source is built in, which is light in weight and convenient to use. 2. The enclosure has an IP66 rating to ensure reliable operation of the lamp under all kinds of harsh conditions. 3. The front end of the lamp is provided with a stainless steel hook that can be rotated 360°. 4. Lightweight, light-weight, portable, hanging and...